Single Row Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:
Excellent for high speeds，Good radial load capacity，Acceptable axial load capacity in both directions，Have low torque capacity at startup and running speeds，Can operate with low noise
Require little maintenance，As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 254 mm x 365,125 mm x 58,738 mm NTN T-EE134100/134143 Single Row Bearings
- Sleeve Bearings
- 0.0
- 204,788 mm x 292,1 mm x 57,945 mm NTN T-M241549/M241510 Single Row Bearings
- Mounted Units & Inserts
- 0.0
- 420 mm x 620 mm x 118 mm NTN 32084 Single Row Bearings
- Flange Block
- 0.0
- 216,408 mm x 285,75 mm x 49,212 mm NTN T-LM742747/LM742710 Single Row Bearings
- Roller Bearings
- 0.0
- 385,762 mm x 514,35 mm x 82,55 mm NTN LM665949/LM665910 Single Row Bearings
- Mounted Cartridge Units
- 0.0
- 447,675 mm x 552,45 mm x 44,45 mm NTN 80176/80217 Single Row Bearings
- Take Up Units
- 0.0