Single Row Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:
Excellent for high speeds，Good radial load capacity，Acceptable axial load capacity in both directions，Have low torque capacity at startup and running speeds，Can operate with low noise
Require little maintenance，As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 780 mm x 925 mm x 92 mm NTN CR-15602 Single Row Bearings
- Take Up Units
- 0.0
- 177,8 mm x 288,925 mm x 63,5 mm NTN T-94700/94113 Single Row Bearings
- Angular Contact Ball Bearing
- 0.0
- 174,625 mm x 288,925 mm x 63,5 mm NTN T-HM237542/HM237510 Single Row Bearings
- Spherical Roller Bearing
- 0.0
- 190,5 mm x 336,55 mm x 95,25 mm NTN T-HH840249/HH840210 Single Row Bearings
- Mounted Units & Inserts
- 0.0
- 209,55 mm x 317,5 mm x 63,5 mm NTN T-93825/93125 Single Row Bearings
- Insert Bearings
- 0.0
- 273,05 mm x 393,7 mm x 69,85 mm NTN T-EE275108/275155 Single Row Bearings
- Cylindrical Roller Bearing
- 0.0
- 384,175 mm x 546,1 mm x 104,775 mm NTN T-HM266448/HM266410 Single Row Bearings
- Thrust Ball Bearings
- 0.0
